/


Latest Post

The easy way to make a ‘Fractured’ card! Video tutorial & free project sheet!


You may have seen these cards online lately; they're quite popular.  It looked s bit intimidating to me; I thought I'd have to do a lot of measuring to get the pieces to fit exactly.  

Well my team member Karen shared how to make them at our August Team meeting and I was surprised to learn it's quite easy peasy!  So I had to share the fractured card on a recent Live video so YOU could see how fun & quick it is.

I chose to use the Hello, Irresistible designer paper and the Irresistible Blooms stamp set; both Online Exclusives. See all of our products available online here.  There are so many they have their own category!  

This card starts out with a full 4" X 5 1/4" layer of designer paper.  The center squares and strips are added on directly over the designer paper!  No measuring needed!!  

**Get the free project sheet here Download Irresistible Blooms Fractured card

This pretty designer paper is in low inventory.  Do you have it yet?  It's just beautiful!

My center squares are approximately 2" in size and are from the Stylish Shapes dies – the middle die of the 5 square dies. I chose to add a 2 1/4" layer under my square.  

Tip: Once you adhere your square to the upper center (eyeballing, no measuring needed) you will start adding your 1/4" X 5" strips of card stock.  You start at the upper center.  Leave the excess strips hanging off the card until you're done; then just trim off.  *watch the video below to see my helpful tips for success. 

Here are both cards I shared in the video; one in Pretty Peacock and the other in Petal Pink. 

 

Which do you prefer?  One is soft and pretty and the other is vibrant. I like the 1/4" strips to match the card base; I feel it gives a greater sense of continuity.  

I kept these cards quite simple but you could certainly add more to it.  

Click here or on the photo below to watch the video.  I believe it will give you the confidence to try it.  

 ~~~

August Specials: 

 *current host codes: KY99RPXP 

Free Gift with orders in August: 

Get a pack of at least 5 beautiful cards with orders over $50 this month. 

The more you order the more cards you get!

*cards are previous card kits to go; over the top and many fun folds.  

**Redeem your Bonus coupons in August! 

All Posts

  • Two more fun fold card swaps by my Flowerbug’s; with measurements!


    Today I'm sharing a few more fun fold cards from our June Team swap with my Flowerbug's.  Our theme was to do a fun fold card using at least one new In Color.  Their cards are amazing!  I'll be sharing them all week!

    First is Marla's card made with the Florals in Bloom DSP seen here.  

    It starts out as a book binding fold… but look what's inside!  An explosion card! 

    Measurements:

    • Card base 11" X 4 1/4" scored at 4 1/4" & 5 1/2"
    • DSP in front 4" square, 1" X 4" strip
    • DSP inside is 6" square. Score in half twice and once diagonally. Adhere only the flat (non-scored) squares to the card inside. 
    • inside white 2 3/4" square

    ~~~

    Next is Jacki's amazing card; who also chose the Florals in Bloom DSP. 

    Her colors include the new Secret Sea (dark blue) with Peach Pie & Pumpkin Pie. Her stamp set is 'With You in Mind' and the 'Delightful Wishes bundle' for the flowers.  Here's how it opens: 

    Measurements:

    • White card bases – two pieces at 10 1/4" X 4" scored at 4 3/4". It's then scored from the bottom left corner to the upper right at 4". The center flat panels overlap each other. 
    • Secret Sea – 3 3/4" square, cut in half on the diagonal – 1 for each side, panel under greeting 3 1/8" square, sides are 5/8" X 3 3/4"
    • DSP 3 1/2" cut in half on the diagonal – 1 for each side
    • White front 3" square, white inside 5 1/4" X 4"

    Isn't it neat?  Her inside greeting is from the Notes & Totes stamp set seen here.  

    ~~~

    June Specials:

    The Suite Sale is on! 

    Buy one get 50% the second item – on all available suite products. 

    Shop here or see products below: 

    ~~~

    Last Chance List has been updated!  see it all here. Don't miss out on the deals!

    ~~~

    Earn free card kits in June with online orders! Get 4 kits with a $50 order and orders over $80 receive all 6 cards. All you need are greetings, gems and adhesives to assemble. 

    Order here 

    ~~~

    Get my Celebratory Sips PDF tutorial free with any online order in June!

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Irresistible Designs emboss resist technique with free project sheet & video


    I shared this card on last week's Live video. I wanted to feature the new Irresistible Designs specialty paper seen here in the new Annual catalog.  It has printed/embossed patterns that are perfect for the emboss resist technique.  

    Which color do you prefer? Are you a yellow or a purple person?  

    My colors include Lemon Lolly, Basic Gray, Smoky Slate and Highland Heather. For inks I chose Lemon Lolly, Smoky Slate and Highland Heather. 

    I cut my strips first, then blended the inks on. I textured the center Smoky Slate layer with the Glass & Gardens embossing folders.  The circle die-cut is from the Spotlight on Nature dies.

    I stamped the greeting twice; first on the circle and again on a small piece of card stock.  I fussy cut the 'Celebrate' out and added it with Stampin' Dimensionals.  This was such an easy card! 

    Here's the free project sheet for these cards: Click on the following link to print or download it.  Download Paper Tags with Irresistible Designs

    I featured the Paper Tags bundle for this card and another one below.  See it here. 

    You can see the other card I shared during the video below.  Besides the emboss resist technique on the diagonal I featured the Joseph's Coat technique.  See it here.  

    Here's the free project sheet with directions, photo, measurements and a supplies list: Download Paper Tags Joseph's Coat card

    Below is the video tutorial for this card and another I shared in the video:

    ~~~

    June Specials:

    The Suite Sale is on! 

    Buy one get 50% the second item – on all available suite products. 

    Shop here or see products below: 

    ~~~

    Last Chance List has been updated!  see it all here. Don't miss out on the deals!

    ~~~

    Earn free card kits in June with online orders! Get 4 kits with a $50 order and orders over $80 receive all 6 cards. All you need are greetings, gems and adhesives to assemble. 

    Order here 

    ~~~

    Get my Celebratory Sips PDF tutorial free with any online order in June!

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Paper Tags Joseph’s Coat technique with video tutorial


    I played with the Paper Tags stamp set and the Irresistible Designs Specialty Paper for last week's video.  Here's my favorite project: 

    The colors include Daffodil Delight, Coastal Cabana and Gorgeous Grape in inks.  The card stock is Black, White, Daffodil and Highland Heather. 

    For the colored designer paper panel I started with a piece at 4" X 5" and blended the three inks on it diagonally. This Irresistible specialty paper seen here resists the ink where they printed the resist designs. Once you add ink, it reveals their pattern.  So cool!  

    After I blended the colors on I randomly cut the single panel into 5 pieces on the diagonal. I share how I did this in the video here. I adhered each panel one at a time starting in the corner. You may need to trim one of the pieces slightly to fit the card base.  

     

    For the inside of the card I stamped the greeting and added color to it with coordinating Blends markers. 

    Here's how you do the Joseph's Coat technique:

    1. Sponge or blend multiple colors onto your neutral cardstock. 
    2. Swipe the embossing buddy over this layer; tap off excess powder. 
    3. Ink the stamp image in Versamark ink; stamp onto the layer. 
    4. Immediately heat emboss with Black embossing powder. 

    Once I had my tag, I trimmed it by hand (there are coordinating dies) and added a few extra pieces to lengthen the tag and add more layers. I finished it off with a bow. 

    Here's the free project sheet with directions, photo, measurements and a supplies list: Download Paper Tags Joseph's Coat card

    Below is the video tutorial for this card and another I shared in the video:

    ~~~

    June Specials:

    The Suite Sale is on! 

    Buy one get 50% the second item – on all available suite products. 

    Shop here or see products below: 

    ~~~

    Last Chance List has been updated!  see it all here. Don't miss out on the deals!

    ~~~

    Earn free card kits in June with online orders! Get 4 kits with a $50 order and orders over $80 receive all 6 cards. All you need are greetings, gems and adhesives to assemble. 

    Order here 

    ~~~

    Get my Celebratory Sips PDF tutorial free with any online order in June!

    Leave a Reply

    Your email address will not be published. Required fields are marked *



Notice: LeeAnn Greff, Independent Stampin’ Up! Demonstrator, Manager. The content of this website is my sole responsibility as an independent Stampin’ Up! demonstrator and the use of, and content of, the classes, services, or products offered on this website is not endorsed by Stampin’ Up! Copyright 2025