/


Latest Post

The easy way to make a ‘Fractured’ card! Video tutorial & free project sheet!


You may have seen these cards online lately; they're quite popular.  It looked s bit intimidating to me; I thought I'd have to do a lot of measuring to get the pieces to fit exactly.  

Well my team member Karen shared how to make them at our August Team meeting and I was surprised to learn it's quite easy peasy!  So I had to share the fractured card on a recent Live video so YOU could see how fun & quick it is.

I chose to use the Hello, Irresistible designer paper and the Irresistible Blooms stamp set; both Online Exclusives. See all of our products available online here.  There are so many they have their own category!  

This card starts out with a full 4" X 5 1/4" layer of designer paper.  The center squares and strips are added on directly over the designer paper!  No measuring needed!!  

**Get the free project sheet here Download Irresistible Blooms Fractured card

This pretty designer paper is in low inventory.  Do you have it yet?  It's just beautiful!

My center squares are approximately 2" in size and are from the Stylish Shapes dies – the middle die of the 5 square dies. I chose to add a 2 1/4" layer under my square.  

Tip: Once you adhere your square to the upper center (eyeballing, no measuring needed) you will start adding your 1/4" X 5" strips of card stock.  You start at the upper center.  Leave the excess strips hanging off the card until you're done; then just trim off.  *watch the video below to see my helpful tips for success. 

Here are both cards I shared in the video; one in Pretty Peacock and the other in Petal Pink. 

 

Which do you prefer?  One is soft and pretty and the other is vibrant. I like the 1/4" strips to match the card base; I feel it gives a greater sense of continuity.  

I kept these cards quite simple but you could certainly add more to it.  

Click here or on the photo below to watch the video.  I believe it will give you the confidence to try it.  

 ~~~

August Specials: 

 *current host codes: KY99RPXP 

Free Gift with orders in August: 

Get a pack of at least 5 beautiful cards with orders over $50 this month. 

The more you order the more cards you get!

*cards are previous card kits to go; over the top and many fun folds.  

**Redeem your Bonus coupons in August! 

All Posts

  • Christmas Card Fun-Folds kit to go – limited quantities!


    If you love making Christmas cards, learning unique fun fold designs & having things pre-cut and ready to go you will love this kit to go!  

    It features the pretty Peaceful Prints designer paper in traditional holiday colors.  Every card is a special fancy fold as well.  

    This pre-cut kit is now sold out. However you can get the PDF tutorial here. 

    This kit was an optional add on for my monthly kit subscribers.  If you'd like to receive a fabulous pre-cut kit each month click below to subscribe. It's $36.50 and always includes $20 in product, 10 pre-cut cards plus the PDF tutorial as well!


    See all of the items in my Kit & Tutorial shop here.  I also offer these handy glue stands as well. 

    ~~~

    October Specials

    Host code: YYUAWBVA

    *click here to order

    Get a free package of Gold & Rose Gold Metallic specialty paper from me with a $50 online order in October! 

    All online orders will receive my October PDF tutorial free! 

    This month it features the Gingerbread & Peppermint suite.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Angled Gate-Fold card with a latch closure; template & video tutorial


    I shared these cards last night on my Monday night Stamp with Me Live.  They're called Angled Gate-Fold cards.

    These first two cards feature the Painted Christmas designer paper, the Thinking, Thanks & Peace stamp set & Seasonal Label dies. The large greeting die-cut was cut smaller by cutting once and reinserting it to trim off a bit. (shared in the video) 

     

    On this card I added dimensionals to only the very left side of the greeting so it could work as a 'latch'.  The right side flap slips between the left side and the die-cut greeting to keep the card closed flat.  *Watch the video below to see how it's done.

    I created an easy template for both the card base and the additional designer paper layer.  

    One important thing to note about the template below for the DSP layer is to be sure to check the direction & side you prefer before trimming off the angles.  You can use this template for both sides; just trim off the opposite edge. 

    I'll share the other two cards I made on Thursday; they're totally different! 

    You can see this video here; click on this photo below to watch. 

    ~~~

    October Specials

    Host code: YYUAWBVA

    *click here to order

    Get a free package of Gold & Rose Gold Metallic specialty paper from me with a $50 online order in October! 

    All online orders will receive my October PDF tutorial free! 

    This month it features the Gingerbread & Peppermint suite.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Whimsy & Wonder Christmas cards kit to go; opt in by October 19th!


    One of this month's kits features the stunning Whimsy & Wonder specialty designer paper in soft, non-traditional colors.  It includes 10 pre-cut cards; most of which are special fun folds.


    You'll receive the 10 pre-cut cards including die-cuts & punched pieces, 1/2 pkg. Whimsy & Wonder DSP (6" X 12"), White Glitter ribbon, a share of Iridescent snowflakes & subtle sequins. All this for $28 and receive the PDF tutorial free ($15 value)!

    This kit does not include pre-stamped images.  You'll use your own ink and stamps to finish the cards. The stamps used are Poinsettia Petals & Tidings & Trimmings but you can substitute other images easily. Inks include Smoky Slate, Misty Moonlight, Mint Macaron

    You'll use the measurements in the PDF tutorial to cut your new designer paper for each card.  This tutorial includes step by step directions, supplies list, photos and measurements. 

    You can choose the tutorial only option here.   

    Be sure to opt in by October 19th here for this kit! You'll receive the PDF tutorial immediately after payment; please check your junk or spam folder! The kit itself is mailed out at the end of October via Priority mail, barring any back orders.  

    This is the kit my monthly subscribers will receive. If you'd like to receive a kit each month click below to subscribe. It's $36.50 and always includes $20 in product, 10 pre-cut cards plus the PDF tutorial as well!

    There is a 2nd Christmas cards kit available as well.  Click here to see it or click here to get both October kits and save on shipping. 


    ~~~

    October Specials

    Host code: YYUAWBVA

    *click here to order

    Clearance Rack has new items!!


    Get a free package of Gold & Rose Gold Metallic specialty paper from me with a $50 online order in October! 

    All online orders will receive my October PDF tutorial free! 

    This month it features the Gingerbread & Peppermint suite.

    Leave a Reply

    Your email address will not be published. Required fields are marked *



Notice: LeeAnn Greff, Independent Stampin’ Up! Demonstrator, Manager. The content of this website is my sole responsibility as an independent Stampin’ Up! demonstrator and the use of, and content of, the classes, services, or products offered on this website is not endorsed by Stampin’ Up! Copyright 2025