/


Latest Post

3 FUN ways to use Window Sheets – check out these Team swaps!


Our swap theme for our Flowerbug's Team was to feature either Window Sheets or Vellum on their cards.  The cards were amazing; as usual! 

Today we're focusing on Window Sheets. 

First is a special card made by Lori.  She used the Window Sheet as her card base!  I'm not sure I've ever seen that before…

She used the Cup of Tea bundle and the newest In Colors on her card.  Orchid Oasis, Parakeet Party & Sweet Sorbet.  

She used the Stitched Rectangle dies for her front 'frame'. It measures 3" X 4 3/8" at the largest. She made two frames; one for the front and one for the inside. The die-cut tea cup is also positioned on the front and the back of the front.  

She added a folded White layer inside that opens up.  It's 3 3/8" X 4" folded in half.  

Then on the very back she added a piece of the Tea Boutique DSP that measures 3" X 4 1/4".  Such a unique card!  

~~~

This next card was made by Ginny.  She used the Dandy Designs DSP for her card front.  It's almost monochromatic but there is a bit of Pear Pizzazz and Black too. So pretty!!


She added a window sheet to bridge the upper and lower layers of the card front.  You can see the greeting through the window sheet.  Her greeting and the pretty floral die-cut is from the Framed Florets bundle.  

Measurements:

  • Card base 4 1/4" X 6 3/4" scored at 5 1/2". Lower card stock layer is 4 1/4" X 3".
  • DSP is 4" X 1" and 4" X 2 3/4"
  • Window sheet is 4" X 2 1/4"

~~~

This next card was made by Paula.  She created a window from her DSP layer, adding Window Sheet behind it and a die-cut flower from the Framed Florets bundle in front. 

The Designer Paper is called Design a Daydream; it's in the annual catalog and is a big 48 pack for just $18.  You can earn it once your order is over $150 with host benefits. 

I love her wrap of linen thread with a tiny little bow as accent. 

Measurements:

  • Soft Sea Foam card base 4 1/4" X 11" scored at 5 1/2"
  • Pear Pizzazz 4" X 5 1/4"
  • DSP 3 3/4" X 5"
  • Window sheet 3" for the circle opening which is 2 1/2" 

~~~

Next is a cute & colorful card that really shows off our Window Sheets! 

Jackie made a type of bridge card where the window sheet allows you to see the inside layer from the front.  

She is featuring the Butterfly Kisses suite here – the Butterfly Kisses 6" DSP and the Build a Butterfly dies

Her window sheet is 4 1/4" X 5 1/2" and she textured it with the Raindrops embossing folder from the Spring Catalog.  The lower layers are added to the base. 

Her colors include Calypso Coral, Starry Sky & Crushed Curry. The curvy borders are done with the Seaside Bay dies. Neat effect!  

She added the greeting inside the card with the Double Oval punch seen here; it's a big favorite of mine that I had wished for.  

Measurements:

  • Card base 4 1/4" X 7", scored at 5 1/2".  Second Calypso Coral layer for the bottom front is 4 1/4" X 1 1/2"
  • DSP layers are 3 7/8" X 1"
  • Starry Night layers are 4 1/8" X 1 1/4" 

Stay tuned for more swaps soon! 

~~~

February specials:

February Host code links:

  CNV2VCBT or 7EUM6NB9 

Get free Pastel Sequins with online orders over $55 when using the host code above!

 Earn free products with my loyalty rewards! 

Click here to download yours and earn a $50 shopping spree!

~~~

Best Deal Ever on the Starter kit here!

Choose $175 in products for just $129 plus the new mini machine!

Or choose $175 for $99 without a new Mini.  AMAZING!

All Posts

  • Kits to Go Clearance sale starts today! While supplies last!


    I have 14 available kits to go right now and I’ve marked most of them down to de-stash my stock. I want to clear them out before we move in a month.

    Be sure to check them all out here.

    Even if they don’t have a ‘Sale’ icon most are still reduced in price. My kits include about $20 in SU product plus the 10-12 pre-cut cards! Most only need greeting images added. You will need adhesives, ink and a paper trimmer to cut the DSP in most cases.

    These are a steal of a deal!

    They’re so fun to create with and many come with both PDF & video tutorials too. Most will include fun fold layouts and you’ll find new ways to create with my unique layouts.

    Shop all tutorials and kits here.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Beautiful swaps with NEW products!


    We held out Team card swap Saturday and I want to share some of these awesome swaps they made. Our theme was to use new catalog products. This swap was ‘shoebox’ style so we made each other’s cards in person. I love shoebox swaps!

    Tracey created this special card using the new Peaceful Pine in color. She paired it with Cloud Cover and Berry Burst here.

    Look at that stamped panel; it is NOT designer paper! She stamped it because she loves to create with our stamps. And she finds it fun to create unique color combos too. She used the stamps from the Boutique Blossoms bundle seen here.

    The Heirloom Boutique suite is one that Stampin’ Up! says will remain current for a year! I love knowing this; it helps when you join swaps and post projects for customers.

    Here I stamped the outline image in 1st generation ink and the inside of the flower and leaves in 2nd generation ink. *that means stamped off once.

    A fabulous card Tracey!

    ~~~~

    And here is Lori’s neat pop-up fun fold card:

    It had three layered panels that pop up from the card front. Very cool!
    It also features the Bloom Boutique suite seen here. It was hard to get a good photo of this fun fold card that she cased from Susan Campfield. The die-cuts on the front are cut from the new 2026-28 In Color Pearlized Specialty paper seen here.

    Here are the measurements:

    Card Base 8 1/2″ X 5 1/2″ score at 4 1/4″
    Flaps – center is 3″ X 5 3/4″ score at 3/4″, 1 1/2″, 4 1/4″, 5″
    top & bottom flaps 3/4″ X 5 3/4″ score at 3/4″, 1 1/2″, 4 1/4″, 5″
    Inside panel of DSP 2 1/2″ X 5 1/4″
    DSP – middle is 2 3/4″ X 2 1/2″, top & bottom 1/2″ X 2 1/2″, left & right 1/2″ X 5 1/4″, sides 1/2″ X 2 3/4″, corners 1/2″ square

    What a special card she made!

    ~~~~

    Next is another special fancy fold card featuring the Bloom Boutique specialty designer paper; this one is created by Kim.

    She featured the All Aflutter punch bundle seen here. I’m so happy we have a new butterfly punch again!

    Her card is a spinner card using Baker’s Twine. It’s fun to set up a card like this so when the recipient removed the card from the envelope the circle spins. You simply wind it up before inserting it in your envelope. So cool!

    We added stamped & punched butterflies all over this card; using the newest In Colors. The inside polka dot DSP panel is from the new Painted Patterns 12 X 12″ DSP seen here. It’s available in most of our color families!

    Before the string is added to the crease of the fold you’ll cut the larger circle from the front. She has so many layers on her card; it can be tricky to get the circle die-cut ‘cut’ through the layers. We ran it back and forth the Cut & Emboss machine but it did cut!

    It’s an amazing card Kim!

    ~~~~~

    Need a few new things from the Summer Catalog?
    Be sure to tack on one of the Product of the Month choices for just $5 (once the order is over $75).

    And if you’re already at $75 bump it up to $100 and earn a FREE Mystery Box from me! I have a few left and they’re stocked up with recently retired Stampin’ Up! products valued at over $200! Shop here.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Another way to feature your embossing folder…..


    Yesterday I shared one way to use ink on an embossed layer. Today I’m sharing another.

    Look closely at the card below. See how there are two different colors on this textured surface? I shared how to do this on last week’s video (see below).

    This is the Floral Spray 3D embossing folder seen here. It just ran out of stock and may be a month or more before it returns. Please add your email so you’re notified when it’s back.

    Here’s how to do this: I inked the smoother side of my folder (the textured areas are recessed) with Hydrangea Hue ink. I then placed my CS on the opposite side of the folder, closed it and ran it through my Cut & Emboss Machine.
    It leaves the raised areas with the original CS color and the rest darker. It’s truly beautiful.

    Here are both cards; with the addition of Peaceful Pine:

    Simple & gorgeous! These cards will seem like you went above and beyond but they’re so simple!

    I used the Classic Labels Mix & Match Ephemera for my greetings as well as the new stamp set called Scalloped Blooms seen here.

    I also tried it with the Sunflower 3D embossing folder too.

    Below is the video tutorial where I share how to achieve this technique. I hope you watch it and try it!

    Want our BEST DEAL on Stampin’ Up! products? Well that is always the Starter Kit.

    Right now you get to choose from 2 options with the $99 kit. Get either all 5 new Magnetic Ink pads or an extra $35 in product of your choice. That makes it $160 in products for just $99 plus free shipping. It’s a no brainer! Click here.

    Leave a Reply

    Your email address will not be published. Required fields are marked *



Notice: LeeAnn Greff, Independent Stampin’ Up! Demonstrator, Manager. The content of this website is my sole responsibility as an independent Stampin’ Up! demonstrator and the use of, and content of, the classes, services, or products offered on this website is not endorsed by Stampin’ Up! Copyright 2025