/


Latest Post

2 different card ideas for a ‘Mystery Card challenge’ with Sentimental Swirls with video


Every few months I offer a 'Mystery Card' challenge to my Flowerbug's Team.  They can opt in to receive a packet from me and I ask that they use some of the pieces in the packet to create a project and share it on our Team page.  They can add anything to the card that they want to. 

I shared these ideas in the video I made on my weekly FB Live. Click here to watch it. 

This time I focused on Brights DSP, vellum doilies, a Label Me Lovely punched piece and our Rainbow Glimmer paper in the annual catalog. 

I pulled out the Sentimental Swirls stamp set seen here for my cards and added Black accents and a strip of Melon Mambo. 

I've always loved swirl images so this set was an easy choice.  Then add in the cute greetings (most are my 'go to' favorites) and 2-step stamp images and it's a hit! 

The card base is white, the DSP was Mango Melody and the Rainbow Glimmer paper had pinks & orange tones.  I used the Ladybug Builder punch for Black bodies & glimmer wings.  I cut the vellum doily in half on the diagonal to add it on the upper and lower part of the card.  A few Artistry adhesive-backed sequins finish it off!

I made a few more with other 'mystery card' packets. This one had Bermuda Bay DSP in it and similar colors of Rainbow Glimmer paper.  I think the bright colors are perfect together!  The orange & pink really pop on the Bermuda Bay! 

The flowers are from the Flowers & Leaves punch and the flower centers are die-cuts from the Pierced Blooms dies. Here I cut the doily in half again and added both pieces at the bottom, under the greeting. 


The Rainbow Glimmer paper is in the Annual Catalog and will likely retire next week.  Get it here while you still can. You can see it in the photos above & below.  


You might wonder where I got that greeting shape.  It's actually the Label Me Lovely punch.  But I altered the size by punching it twice; removing some of it so it was much smaller.  

To do this easily, I stamp on a scrap of White and punch it out as usual.  Then I adhere a strip of card stock (black in the photo above) to the edge of the punched piece and insert it back into the punch.  The strip of card stock allows me to 'reach' and adjust the punch easily.  

Which card is your favorite? 

You'll enjoy the tips & ideas in the video below; click on the photo to watch it. 

 

~~~

March Specials: 

Host codes: FS239K9C

 *click here to order 

If your order is over $50 you'll receive a free embellishment

from the Jan-June catalog in your thank you card.

Email me to opt in for my Waves card kit to go here; it includes the Waves bundle!

Or the Flowering Fields kit seen here. 

  

Don't forget about my loyalty rewards! 

Click here to download yours and earn a $50 shopping spree!  

All Posts

  • Kits to Go Clearance sale starts today! While supplies last!


    I have 14 available kits to go right now and I’ve marked most of them down to de-stash my stock. I want to clear them out before we move in a month.

    Be sure to check them all out here.

    Even if they don’t have a ‘Sale’ icon most are still reduced in price. My kits include about $20 in SU product plus the 10-12 pre-cut cards! Most only need greeting images added. You will need adhesives, ink and a paper trimmer to cut the DSP in most cases.

    These are a steal of a deal!

    They’re so fun to create with and many come with both PDF & video tutorials too. Most will include fun fold layouts and you’ll find new ways to create with my unique layouts.

    Shop all tutorials and kits here.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Beautiful swaps with NEW products!


    We held out Team card swap Saturday and I want to share some of these awesome swaps they made. Our theme was to use new catalog products. This swap was ‘shoebox’ style so we made each other’s cards in person. I love shoebox swaps!

    Tracey created this special card using the new Peaceful Pine in color. She paired it with Cloud Cover and Berry Burst here.

    Look at that stamped panel; it is NOT designer paper! She stamped it because she loves to create with our stamps. And she finds it fun to create unique color combos too. She used the stamps from the Boutique Blossoms bundle seen here.

    The Heirloom Boutique suite is one that Stampin’ Up! says will remain current for a year! I love knowing this; it helps when you join swaps and post projects for customers.

    Here I stamped the outline image in 1st generation ink and the inside of the flower and leaves in 2nd generation ink. *that means stamped off once.

    A fabulous card Tracey!

    ~~~~

    And here is Lori’s neat pop-up fun fold card:

    It had three layered panels that pop up from the card front. Very cool!
    It also features the Bloom Boutique suite seen here. It was hard to get a good photo of this fun fold card that she cased from Susan Campfield. The die-cuts on the front are cut from the new 2026-28 In Color Pearlized Specialty paper seen here.

    Here are the measurements:

    Card Base 8 1/2″ X 5 1/2″ score at 4 1/4″
    Flaps – center is 3″ X 5 3/4″ score at 3/4″, 1 1/2″, 4 1/4″, 5″
    top & bottom flaps 3/4″ X 5 3/4″ score at 3/4″, 1 1/2″, 4 1/4″, 5″
    Inside panel of DSP 2 1/2″ X 5 1/4″
    DSP – middle is 2 3/4″ X 2 1/2″, top & bottom 1/2″ X 2 1/2″, left & right 1/2″ X 5 1/4″, sides 1/2″ X 2 3/4″, corners 1/2″ square

    What a special card she made!

    ~~~~

    Next is another special fancy fold card featuring the Bloom Boutique specialty designer paper; this one is created by Kim.

    She featured the All Aflutter punch bundle seen here. I’m so happy we have a new butterfly punch again!

    Her card is a spinner card using Baker’s Twine. It’s fun to set up a card like this so when the recipient removed the card from the envelope the circle spins. You simply wind it up before inserting it in your envelope. So cool!

    We added stamped & punched butterflies all over this card; using the newest In Colors. The inside polka dot DSP panel is from the new Painted Patterns 12 X 12″ DSP seen here. It’s available in most of our color families!

    Before the string is added to the crease of the fold you’ll cut the larger circle from the front. She has so many layers on her card; it can be tricky to get the circle die-cut ‘cut’ through the layers. We ran it back and forth the Cut & Emboss machine but it did cut!

    It’s an amazing card Kim!

    ~~~~~

    Need a few new things from the Summer Catalog?
    Be sure to tack on one of the Product of the Month choices for just $5 (once the order is over $75).

    And if you’re already at $75 bump it up to $100 and earn a FREE Mystery Box from me! I have a few left and they’re stocked up with recently retired Stampin’ Up! products valued at over $200! Shop here.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Another way to feature your embossing folder…..


    Yesterday I shared one way to use ink on an embossed layer. Today I’m sharing another.

    Look closely at the card below. See how there are two different colors on this textured surface? I shared how to do this on last week’s video (see below).

    This is the Floral Spray 3D embossing folder seen here. It just ran out of stock and may be a month or more before it returns. Please add your email so you’re notified when it’s back.

    Here’s how to do this: I inked the smoother side of my folder (the textured areas are recessed) with Hydrangea Hue ink. I then placed my CS on the opposite side of the folder, closed it and ran it through my Cut & Emboss Machine.
    It leaves the raised areas with the original CS color and the rest darker. It’s truly beautiful.

    Here are both cards; with the addition of Peaceful Pine:

    Simple & gorgeous! These cards will seem like you went above and beyond but they’re so simple!

    I used the Classic Labels Mix & Match Ephemera for my greetings as well as the new stamp set called Scalloped Blooms seen here.

    I also tried it with the Sunflower 3D embossing folder too.

    Below is the video tutorial where I share how to achieve this technique. I hope you watch it and try it!

    Want our BEST DEAL on Stampin’ Up! products? Well that is always the Starter Kit.

    Right now you get to choose from 2 options with the $99 kit. Get either all 5 new Magnetic Ink pads or an extra $35 in product of your choice. That makes it $160 in products for just $99 plus free shipping. It’s a no brainer! Click here.

    Leave a Reply

    Your email address will not be published. Required fields are marked *



Notice: LeeAnn Greff, Independent Stampin’ Up! Demonstrator, Manager. The content of this website is my sole responsibility as an independent Stampin’ Up! demonstrator and the use of, and content of, the classes, services, or products offered on this website is not endorsed by Stampin’ Up! Copyright 2025