/

Home
Shop Now
YouTube Videos
Free Project Sheets
Card Kits & Tutorials
Promotions
Frequent Shopper Perks
Join the Fun
Contact Me

Latest Post

One Horse Open Sleigh Fun Fold cards with video & measurements!

On last week's Live video I shared three fantastic fun fold cards featuring the One Horse Open Sleigh designer paper – it's an Online Exclusive you can see here.  

One Horse Open Sleigh 2a Save

These cards were featured in last month's card kit to go; each card is a fancy fold!  The kit is no longer available but the PDF tutorial is here.   You can see all of the cards in the tutorial below:

One Horse Open Sleigh all . Save

I love this card because it shows off the full beauty of this scenic paper. Whenever I have a pretty scenic paper I want to show off  this is the layout I use.

Just trim off 3/4" of the upper or lower edge of the designer paper and cut using the following measurements: 

Measurements:

  • DSP – start with 1 piece 5 ¼” tall X 6” wide. Make your first cut 2 ¾” from the left edge vertically.  From that cut edge cut another piece at 1 1/8"
  • Card base 8 ½” X 5 ½” score at 1 ½” & 4 ¼”
  • White inside 1 ¾” X 5 ¼”

One Horse Open Sleigh 2 Save

I used the Layering Leaves stamp set for my greetings.  It's my favorite set from the Annual Catalog; see it here. 

LAYERING LEAVES PHOTOPOLYMER STAMP SET (ENGLISH) Save

~~~

September Specials: 

 *current host code: Z9BRPPWA or MYF6MXAG

Reserve your Holiday catalog designer paper share:

Holiday catalog dsp share Save
$37 with shipping to you; message me here

(There may be a delay due to a few papers being unavailable for a bit)

*Get a free 6 card kit with orders over $55 (Includes card bases, coordinating envelopes, Memories & More cards, gems & more) 

~~~

NEW Designer papers released September 6th!  While supplies last!

Sept designer paper release Save

All Posts

  • Origami Christmas Tree card; soooo easy!

    I make one of these trees almost every year.  Why? Because they are easy & fun and we always have new Designer Paper for me to play with. 

    All you need are four squares of DSP. No scoring or other measurements.  Watch the video here or below to see how it's done. 

    Origami Christmas trees. Save

    Here are the supplies:

    • Card stock – Old Olive & Mossy Meadow card bases, Real Red & Cherry Cobbler layers, White greeting strip & inside
    • Designer Paper – Heartwarming Hugs (out of stock now) and Sweet Stockings
    • Greeting image from the Christmas Cheer stamp set
    • Star topper from the Starlit punch
    • Embossing folder – Evergreen Forest (out of stock temporarily) 

    Origami Christmas trees. Save

    Measurements: 

    • Card base 5 ½” X 8 ½”
    • DSP – 4 square pieces at 1 ¼”, 1 ¾”, 2 ¼” & 2 ¾”
    • Textured front & White inside are 4” X 5 ¼”

    Below is the video for you. I share another special card project and some pretty star/snowflake ornaments as well.  

    ~~~

    December Specials:

    Host code:  6YCWV7QN

     *click here to order 

    Use the host code above & get a free card stock sampler ring with a $50 order in December! 

    Card stock ring Save

    See the last chance list here

    See the July-December catalog carry over list here

    Last chance list Save

    Clearance rack Save

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Easy Christmas Ornament card

    I think this is pretty clever & unique; it's a 'faux' Christmas ornament on a card. And it's quick & easy too!  

    Christmas ornament cards Save

    It looks so real; like you could lift it off!  And you actually could if you use temporary adhesive; or add it to a pocket.  

    I shared this project on a FB Live last week.  It's the second project I made in this video.  

    Products used:

    • Merry Melody embossing folder on the White CS
    • The ornament is made with the largest smooth circle in our Circles dies. 
    • The DSP is called Painted Christmas and is in low inventory right now.  
    • Elegant Trim for the 'hanger'. 
    • Brushed Metallic specialty CS for the 'hanger'. 
    • Heat embossing for the greeting – from the Words of Cheer stamp set. 
    • CS is Real Red, White & Evening Evergreen 

    Here's a close-up of it. 

    Christmas ornament cards Save

    I give a few hints in the video on achieving this.  Basically you want to stamp your greeting first and add it to your DSP.  THEN cut both pieces out at the same time with your circle die. 

    Christmas ornament cards Save

    Below is the video for you. I share another special card project and some pretty star/snowflake ornaments as well.  

    ~~~

    December Specials:

    Host code:  6YCWV7QN

     *click here to order 

    Use the host code above & get a free card stock sampler ring with a $50 order in December! 

    Card stock ring Save

    See the last chance list here

    See the July-December catalog carry over list here

    Last chance list Save

    Clearance rack Save

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Fun way to use paper strips! Live video tonight!

    We made these cards on FB Live Monday night.  What a fun and easy way to use up your extra designer paper pieces! Click here to watch the video. 

    Pattern Party green Save

    I used the Pattern Party designer paper for these cards. It's a host choice in the back of the annual catalog seen here.  One side is Black & White and the other is colorful prints. I love the black & white patterns with a pop of color! 

    Tips: 

    • I start out with a 2 1/4" X 4 3/4" piece of neutral CS.  This is what I adhered the strips of Designer Paper to. 
    • I added Seal adhesive over the entire piece and added the strips one by one. 
    • Apply one strip across the middle at an angle first. Then keep filling in. 
    • I trimmed the excess off the edges once I had it well covered with strips.  
    • My DSP strips measure between 1/4" and 5/8" wide and about 3" long.  It doesn't matter how wide your strips are; it looks great if they're different widths.  
    • Add dimensionals to the back of this piece for added dimension. 
    • Add a greeting and accents if desired. 

    Pattern Party strips both Save

    You might wonder where this greeting is from.  It's an upcoming Sale-a-Bration stamp set called 'Hello Friend'.  It's in a bundle with a pack of Designer Paper.  It will be free with a $100 purchase during SAB in January & February.  Of course Demo's can earn it free now during our pre-order period. 

    The other new items here is a punch.  Can you spot it?  It's called the bough punch and has two options in the punch.  The large leaf and the 'buds' too.  

    Pattern Party Curry Save

    Below is the video for you: 

    ~~~

    December Specials:

    Host code:  6YCWV7QN

     *click here to order 

    Use the host code above & get a free card stock sampler ring with a $50 order in December! 

    Card stock ring Save

    See the last chance list here

    See the July-December catalog carry over list here

    Last chance list Save

    Clearance rack Save

    Leave a Reply

    Your email address will not be published. Required fields are marked *

Notice: LeeAnn Greff, Independent Stampin’ Up! Demonstrator, Manager. The content of this website is my sole responsibility as an independent Stampin’ Up! demonstrator and the use of, and content of, the classes, services, or products offered on this website is not endorsed by Stampin’ Up! Copyright 2025