/


Latest Post

Control Freaks New Catalog Blog Hop


It's time for our monthly Freak's blog hop!!  Our focus today is the new Annual Catalog.  We have lots of amazing projects to share with you using brand new products. 

You may have arrived from Tami's blog; I'm sure you loved her projects!  Or maybe you just started here.  To see all 12 posts be sure to click on the icon at the bottom of each post. 

It's been so fun to play with exciting new products from the 2020 Annual Catalog!  Are you ready for some glitz & shine?

I chose to play with the Forever Gold Laser-cut Specialty Paper today.  It's part of the Forever Greenery suite of products.  You can see it best on page 152 of your annual catalog. It has 6 sheets; 3 each of 2 single sided designs. One side is gold and the other is white which you can color, spritz or sponge.  I chose to use the gold sides for my projects here.  

You can see the details & measurements for each one under the photo. 

I chose to use jewel toned card stock for each card; I think it looks rich & regal with these colors.  The card above is Blackberry Bliss with Very Vanilla.  The pretty golden leafy medallion is all one piece; just punched out from the pack.  I added a 1" X 4 1/4" strip of Vanilla under it and a stamped die cut above with a few metallic pearls.  The stamped image is from Dandelion Wishes and the die is from the Stitched So Sweetly dies. 

This card is Shaded Spruce with Vanilla.  It's hard to see but the large 4" X 5 1/4" vanilla is textured with our Tasteful Textile embossing folder. The greeting is stamped on a die from Tasteful Labels using the Heart to Heart stamp set.

Once I had these pieces adhered I could add the laser cut piece on top. I added a bit of liquid multipurpose adhesive to the edges and a few leaves and it's done!

The laser cut card front pops out so easily from the rest in the sheet. No fussy cutting or die-cutting with these! 

This is probably my favorite one of the three. This laser-cut piece is delicate and leafy; it leaves a perfect area for a greeting in the stitched center. The card is Night of Navy with a 2" strip of the World of Good designer paper across the middle. 

I stamped the 'Always' greeting (Field of Flowers set) on a 1 1/2" X 2 1/4" piece of Very Vanilla card stock and sponged the edge with Misty Moonlight ink.  The 'In My Heart' greeting is embossed with Gold embossing powder on Misty Moonlight card stock and punched out with the Classic Label punch. 

Did you spy the cute little flowers on this card?  They're from the new Confetti Flowers Border punch. Each one has a Metallic pearl on it.  

I hope you enjoyed seeing these pretty cards with the beautiful Forever Gold Laser-cut Specialty Paper.  If you like shine and glitz you'll love it! 

~~~

Thanks for stopping in to see my projects.  Now you're off to see what Cindy has to share.  I know you'll love it; I always do.

 

All Posts

  • The last of my 10 amazing card ideas for Paper Strips!


    Today I'm sharing the last of the 10 cards I made on my Facebook Live video.  If you aren't following me on Facebook yet click here. I host a video each Tuesday morning at 11 am CT and twice a month on Monday evenings as well. 

    I had a bunch of paper strips leftover from cutting out for cards and kits and created some fun & unique cards with them.  We're calling them 'Stripper Cards'! 

    Here's a favorite I made with 3/4" X 3 3/4" strips of Bermuda Bay, Pool Party & Pumpkin Pie.  

    I started out with a 4" X 5 1/4" piece of White CS.  Starting at the bottom I added a strip and alternated colors and directions each time.  I focused on keeping the tips at the same area and left the excess 'wide' end hang over the edge.  

    I had to leave enough space to stamp the greeting (You Are Amazing set seen here) so I stopped about 1 1/2" up.  The last piece may need to be trimmed before you add that skinny little edge strip.  A few Holiday rhinestones finish it off. 

    On my video (scroll down) I used Real Red with the Pool Party & Bermuda Bay.  Which do you prefer?  


    ~~~

    This is another of my favorites!  So easy and just plain fun!


    I cut random lengths of 1/4" strips and adhered them to a 4" X 5 1/4" piece of Black card stock. The greeting is from the Sweet Ice Cream set stamped on a 1" X 4 3/4" strip of White CS.  Add this and trim the ends off before you add it to the main Coastal Cabana card base.  

    Here are both versions; which do you prefer?  


    • Left features Coastal Cabana, Bermuda Bay, Crushed Curry & Pumpkin Pie.
    • Right has Coastal Cabana, Bermuda Bay, Granny Apple Green, Pacific Point and Daffodil Delight. 

    Below is the video for all 10 'stripper' card ideas using leftover strips of paper! 


     

    ~~~

    April Specials!

    Click here for the Annual Catalog Retiring List; many discounted items while supplies last! 

    Current Host code is 3PA3P32V

    Order online here

    ~~~

    Get a free multipurpose glue stand with an online order over $60 using the host code above. You'll receive a color of my choice unless you let me know your preference. *if you'd rather have gems; let me know.

    *If your order is over $150 do not use the code; you'll still receive a gift! 

    You can also order them in my Shop here. 

    All online orders will receive a free 14 project PDF tutorial

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • More fun cards with leftover paper strips


    I wanted these cards to be bright and happy so I chose my brightest colors of strips! 

    This first card has 1/4" strips adhered to a White layer 2 1/2" wide.  

    After I had the White piece covered with strips I trimmed off the excess on the edges and added it to the White card base.  Then I added the pretty dandelion White die-cuts (from the Dandy Wishes dies here).  That stitched greeting tag is from the Hydrangea Dies seen here.  Artistry Blooms adhesive-backed sequins finish it off as well as a twine bow.

    ~~~

    Next is a card with a woven heart.  I think it's pretty neat!  And it looks difficult but it's just a few extra steps to die-cut the shape. *Watch the video below to catch my tips on paper weaving. 


    I share a good demo on this technique in the video below.  The strips are 1/2" and the heart shape is die-cut with the retiring Stitched Be Mine dies seen here.  There are 16 dies with lots of heart shapes & borders in many sizes.  

    The pretty textures are from the Little Details embossing folders seen here.  It's just $3.20 right now; while supplies last! 

    Here's the video for all 10 of my paper strips projects!  

    ~~~

    April Specials!

    Click here for the Annual Catalog Retiring List; many discounted items while supplies last! 

    Current Host code is PX6ZWGM7

    Order online here

    ~~~

    Get a free multipurpose glue stand with an online order over $60 using the host code above. You'll receive a color of my choice unless you let me know your preference. *if you'd rather have gems; let me know.

    *If your order is over $150 do not use the code; you'll still receive a gift! 

    You can also order them in my Shop here. 

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Quick cards for Men using paper strips!


    I thought paper strips were a perfect way to create cards for men.  So I chose some 1/2" strips of blues and greens and adhered them to a piece of White 4 1/4" X 5 1/2" card stock at an angle. 

    Add them at an angle, graduating colors as you go if you wish.  Once you're added strips trim off the excess on the edges.  

    Next I used the retiring Well Written 'birthday' dies seen here and cut it out of the stripes piece.  I wanted the greeting to reflect the same colors in the background.  So easy!  

    I adhered it to the Tasteful Labels die-cut with Multipurpose Glue. I stamped 'Happy' from the coordinating stamp set Well Said seen here and fussy cut it to add to the card.  

    ~~~

    Next is another card with the exact same colors but totally different.  I adhered 1/2" strips to the edge of a White card base.  I didn't worry about the outer edge until I was done; trimming it off afterwards.  I focused on the left edge being even.   

    I added a skinny 1/8" strip of Night of Navy to cover up any unevenness on my left edge.  A length of Navy twine wrapped around and into a bow finishes it off. 

    The 'you' is from the Well Written dies and the 'make me smile' is rom the Well Said stamp set (heat embossed in White) on a Navy Tailored Tag punch.

           

       

    Here's the video for all 10 paper strips projects!  

    More details on my paper strips projects tomorrow! 

    ~~~

    April Specials!

    Click here for the Annual Catalog Retiring List; many discounted items while supplies last! 

    Current Host code is 3PA3P32V

    Order online here

    ~~~

    Get a free multipurpose glue stand with an online order over $60 using the host code above. You'll receive a color of my choice unless you let me know your preference. *if you'd rather have gems; let me know.

    *If your order is over $150 do not use the code; you'll still receive a gift! 

    You can also order them in my Shop here. 

    All online orders will receive a free 14 project PDF tutorial

    Leave a Reply

    Your email address will not be published. Required fields are marked *



Notice: LeeAnn Greff, Independent Stampin’ Up! Demonstrator, Manager. The content of this website is my sole responsibility as an independent Stampin’ Up! demonstrator and the use of, and content of, the classes, services, or products offered on this website is not endorsed by Stampin’ Up! Copyright 2025