/


Latest Post

Control Freaks New Catalog Blog Hop


It's time for our monthly Freak's blog hop!!  Our focus today is the new Annual Catalog.  We have lots of amazing projects to share with you using brand new products. 

You may have arrived from Tami's blog; I'm sure you loved her projects!  Or maybe you just started here.  To see all 12 posts be sure to click on the icon at the bottom of each post. 

It's been so fun to play with exciting new products from the 2020 Annual Catalog!  Are you ready for some glitz & shine?

I chose to play with the Forever Gold Laser-cut Specialty Paper today.  It's part of the Forever Greenery suite of products.  You can see it best on page 152 of your annual catalog. It has 6 sheets; 3 each of 2 single sided designs. One side is gold and the other is white which you can color, spritz or sponge.  I chose to use the gold sides for my projects here.  

You can see the details & measurements for each one under the photo. 

I chose to use jewel toned card stock for each card; I think it looks rich & regal with these colors.  The card above is Blackberry Bliss with Very Vanilla.  The pretty golden leafy medallion is all one piece; just punched out from the pack.  I added a 1" X 4 1/4" strip of Vanilla under it and a stamped die cut above with a few metallic pearls.  The stamped image is from Dandelion Wishes and the die is from the Stitched So Sweetly dies. 

This card is Shaded Spruce with Vanilla.  It's hard to see but the large 4" X 5 1/4" vanilla is textured with our Tasteful Textile embossing folder. The greeting is stamped on a die from Tasteful Labels using the Heart to Heart stamp set.

Once I had these pieces adhered I could add the laser cut piece on top. I added a bit of liquid multipurpose adhesive to the edges and a few leaves and it's done!

The laser cut card front pops out so easily from the rest in the sheet. No fussy cutting or die-cutting with these! 

This is probably my favorite one of the three. This laser-cut piece is delicate and leafy; it leaves a perfect area for a greeting in the stitched center. The card is Night of Navy with a 2" strip of the World of Good designer paper across the middle. 

I stamped the 'Always' greeting (Field of Flowers set) on a 1 1/2" X 2 1/4" piece of Very Vanilla card stock and sponged the edge with Misty Moonlight ink.  The 'In My Heart' greeting is embossed with Gold embossing powder on Misty Moonlight card stock and punched out with the Classic Label punch. 

Did you spy the cute little flowers on this card?  They're from the new Confetti Flowers Border punch. Each one has a Metallic pearl on it.  

I hope you enjoyed seeing these pretty cards with the beautiful Forever Gold Laser-cut Specialty Paper.  If you like shine and glitz you'll love it! 

~~~

Thanks for stopping in to see my projects.  Now you're off to see what Cindy has to share.  I know you'll love it; I always do.

 

All Posts

  • Easy Medallion cards with the Plenty of Patterns masks with video


    I played with the Plenty of Pattern masks on last week's FB Live and here are three cards I shared.  Follow me on Facebook here. 

    I decided to feature some of the pretty 2021-23 In Colors.  This first card is in Fresh Freesia. 

    I used Blending Brushes and Fresh Freesia ink to add the medallion to the CS. The flower in the center is made with our Shimmer In Color Vellum paper & the Dandy Wishes dies seen here.  

    The greetings are stamped on a strip of White CS.  The edges are created with a new set of dies coming out in the 2022 Jan-June catalog called the Tropical Layer dies. It's a scalloped/stitched edge die I ran through twice. 

    Above is Soft Succulent with a Vellum CS flower. 

    Here's a photo of all 3 of them together.  Here you can see three of the four medallions in one of the masks. They're all unique and so pretty! 

    And next is our pretty Pale Papaya color.  The flower center is cut from White CS and the edges are curled up and sponged. 

    Measurements:

    • Card base 4 1/4" X 11" scored at 5 1/2"
    • Sponged CS 3" X 4 1/4"
    • White layer 3 1/4" X 4 1/2", greeting strip 1" X 3 1/4" 

    Below is the video with these projects & lots more! 

    ~~~

    December Specials:

    Host code:  6YCWV7QN

     *click here to order 

    Use the host code above & get a free card stock sampler ring with a $50 order in December! 

    See the last chance list here

    See the July-December catalog carry over list here

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • A Stunning Christmas to Remember card


    The picture does not do this card justice!  It's stunning in person! 


     

    I received it from Bobby, one of my Flowerbug team members.  It's elegant in the all White & Gold colors.  She added two main layers of the large pine dies; one in white & another in Gold under it offset a bit.  Then a few layered pinecones too.  

    It's made with the Christmas to Remember bundle with White, Gold Foil paper, Brushed Metallic Adhesive-Backed dots, Gold heat embossing & Gold shimmer ribbon.  You can see this bundle here.  

    The dies are called Christmas Pine Cone dies and can be seen here. 

    ~~~

    December Specials:

    Host code:  6YCWV7QN

     *click here to order 

    Use the host code above & get a free card stock sampler ring with a $50 order in December! 

    See the last chance list here

    See the July-December catalog carry over list here

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Peaceful Cabin; beautiful!


    We made this beautiful card at my December card clubs; it features the Peaceful Cabin bundle.  Unfortunately the stamp set is already sold out and unavailable. So sad; it's just gorgeous! 

    I used only White card stock and Misty Moonlight ink. A monochromatic card can be so simple & soothing to the eye.  And there's something about a mostly white card that is rich and elegant. It’s cased from a card made by Helen Reed  

     

    The texture on the background is made with the Evergreen Forest 3D embossing folder.  That is also currently unavailable. But it is in the annual catalog and will be back. 

    There are two pieces that you stamp first and then die-cut.  The background trees is one layer and the cabin and foreground is another.  It's so neat how the dies cut the silhouettes out so perfectly. 

    Measurements:
    White card base 5 1/2" X 8 1/2"
    White layers – for trees – 3 3/4" X 2 3/4", for cabin 2 3/4" X 5 1/4", embossed layer is 4" X 5 1/4"

    ~~~

    December Specials:

    Host code:  6YCWV7QN

     *click here to order 

    Use the host code above & get a free card stock sampler ring with a $50 order in December! 

    See the last chance list here

    See the July-December catalog carry over list here

    Leave a Reply

    Your email address will not be published. Required fields are marked *



Notice: LeeAnn Greff, Independent Stampin’ Up! Demonstrator, Manager. The content of this website is my sole responsibility as an independent Stampin’ Up! demonstrator and the use of, and content of, the classes, services, or products offered on this website is not endorsed by Stampin’ Up! Copyright 2025