/


Latest Post

3 in 1 Triple Panel cards


I made these pretty cards on last week's Facebook Live 'Stamp with Me' Monday night. *See video below

The 2nd & 4th Monday's you can stamp with me Live on Facebook here.  The next one is Monday, August 10th. I post the measurements & supplies ahead of time so you can prepare.  Then afterwards you can share your cards too! 

I chose to use a Triple Panel technique; at least that's what I'm calling it.  I saw a sketch like it and created my own version here.  You start out with 3 pieces of card stock or designer paper and cut them all the same way.  

I used Bumblebee, Night of Navy and Smoky Slate for the cards above along with the Tasteful Touches bundle.  That pretty leaf die-cut is from the Birds & More dies set. 

Measurements:
Three pieces of card stock or DSP measuring 4 1/4" X 5 1/2".
Cute one full 5 1/2" X 8 1/2" card base of each color you use.
 
Cutting directions:
1st cut: Cut the first small triangle off of each piece. (On the bottom right card it's the Navy piece) Make a mark 1 1/2" from the bottom left corner and 2" from the bottom right corner. Cut this triangle off of all three pieces.
2nd cut: Make a mark from the upper left corner across at 1 3/4". Make a mark 2" from the lower left angled edge. Cut.
The 3rd cut isn't necessary as you'll use the angled piece left from the first two cuts.
Now you have three different colored pieces for each card. Mix & match one color per card!

On the cards above the colors are Bermuda Bay, Black and Smoky Slate and the same Tasteful Touches bundle and leaf die from above. 

 

~~~

Bonus Days are here!

 
Redeem your $5 coupons now!  Don't forget!   

~~~

Current Host code is QW7SUYVX

Get a free package of new Iridescent Pearls in August with an online order over $55. 

Order online here

 Get my Flowers for Every Season pdf tutorial free with any online order in August


It includes directions, photos and measurements for 12 cards!

All Posts

  • 3 fun fold cards celebrating Strawberry Slush!


    I have THREE neat fun fold cards from our June Team card swap.  My Flowerbug's did an incredible job on their fun fold cards!  

    First up is Sharon's card featuring the Cheers & Sips bundle seen here. 

    The top card base layer is scored to creates a box that pops up & supports the front panel. Super neat! 

    She added Fine Tip Glue to her fussy cut drinks for some shine.  To do this you need to let it set awhile to dry. I'd recommend two layers.  If you don't want it to get a bit curvy from the liquid in the glue, add a layer of card stock under it.  

    Her inside greeting is from the Unbounded Love set.  The gems are from the Holographic Resin dots.

    Measurements:

    • Strawberry Slush card base 8 1/4" X 5 1/2" scored at 4 1/4", 5 3/4", 6 1/4", 7 3/4"
    • front CS panel 2 3/4" X 4"
    • DSP 2 pieces at 1 3/8" X 5 3/8", pieces under the greeting are 2 3/4" X 1 1/4", 2 3/4" X 1/4" and inside is 2 3/4" X 1 1/4" 
    • inside White panel 2 3/4" X 4"

    ~~~

    Next is a neat Latch card made by Kathy who used the Sweet Jar bundle seen here. 

    Her colors include Cloud Cover and Strawberry Slush. The Designer Paper is from the Florals in Bloom DSP seen here. 

    The front flap opens up to reveal another panel that she stamped with coffee beans and the die-cut from the Paper Pumpkin add on dies (now retired).

    And the front panel open up too!  

    Measurements:

    • card base 7 1/4" X 5 1/2" scored at 4 1/4"
    • DSP 2 3/4" X 5 1/4"
    • White panels X 3 – 2 3/4" square; inside 4" X 5 1/4"
    • Strawberry Slush square 3"
    • 2 1/2" X 1" scored at 1 1/4" connecting piece

    ~~~

    And now for the final card today. This one was made by Paula and was cased from Heidi Colins.  It's called a Buckle card:

    She used the Floral Impressions DSP on the front and cut a window in the front panels so the buckle could slip in.  

    Products used include the Stylish Shapes dies, Swirly EF, In Color flat pearls, and Brass Butterflies.

    Measurements:

    • Card base 8 1/2" X 5 1/2" scored at 4 1/4"
    • DSP 4" X 5 1/4", inside 3 3/4" X 1/2" 
    • buckle 4 1/2" X 1 1/4" scored at 1/2"
    • largest circle is 2 1/8" but Paula recommends slightly larger

    Here's the final opening: 

    ~~~

    June Specials:

    The Suite Sale is on! 

    Buy one get 50% the second item – on all available suite products. 

    Shop here or see products below: 

    ~~~

    Last Chance List has been updated!  see it all here. Don't miss out on the deals!

    ~~~

    Earn free card kits in June with online orders! Get 4 kits with a $50 order and orders over $80 receive all 6 cards. All you need are greetings, gems and adhesives to assemble. 

    Order here 

    ~~~

    Get my Celebratory Sips PDF tutorial free with any online order in June!

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Two more fun fold card swaps by my Flowerbug’s; with measurements!


    Today I'm sharing a few more fun fold cards from our June Team swap with my Flowerbug's.  Our theme was to do a fun fold card using at least one new In Color.  Their cards are amazing!  I'll be sharing them all week!

    First is Marla's card made with the Florals in Bloom DSP seen here.  

    It starts out as a book binding fold… but look what's inside!  An explosion card! 

    Measurements:

    • Card base 11" X 4 1/4" scored at 4 1/4" & 5 1/2"
    • DSP in front 4" square, 1" X 4" strip
    • DSP inside is 6" square. Score in half twice and once diagonally. Adhere only the flat (non-scored) squares to the card inside. 
    • inside white 2 3/4" square

    ~~~

    Next is Jacki's amazing card; who also chose the Florals in Bloom DSP. 

    Her colors include the new Secret Sea (dark blue) with Peach Pie & Pumpkin Pie. Her stamp set is 'With You in Mind' and the 'Delightful Wishes bundle' for the flowers.  Here's how it opens: 

    Measurements:

    • White card bases – two pieces at 10 1/4" X 4" scored at 4 3/4". It's then scored from the bottom left corner to the upper right at 4". The center flat panels overlap each other. 
    • Secret Sea – 3 3/4" square, cut in half on the diagonal – 1 for each side, panel under greeting 3 1/8" square, sides are 5/8" X 3 3/4"
    • DSP 3 1/2" cut in half on the diagonal – 1 for each side
    • White front 3" square, white inside 5 1/4" X 4"

    Isn't it neat?  Her inside greeting is from the Notes & Totes stamp set seen here.  

    ~~~

    June Specials:

    The Suite Sale is on! 

    Buy one get 50% the second item – on all available suite products. 

    Shop here or see products below: 

    ~~~

    Last Chance List has been updated!  see it all here. Don't miss out on the deals!

    ~~~

    Earn free card kits in June with online orders! Get 4 kits with a $50 order and orders over $80 receive all 6 cards. All you need are greetings, gems and adhesives to assemble. 

    Order here 

    ~~~

    Get my Celebratory Sips PDF tutorial free with any online order in June!

    Leave a Reply

    Your email address will not be published. Required fields are marked *

  • Irresistible Designs emboss resist technique with free project sheet & video


    I shared this card on last week's Live video. I wanted to feature the new Irresistible Designs specialty paper seen here in the new Annual catalog.  It has printed/embossed patterns that are perfect for the emboss resist technique.  

    Which color do you prefer? Are you a yellow or a purple person?  

    My colors include Lemon Lolly, Basic Gray, Smoky Slate and Highland Heather. For inks I chose Lemon Lolly, Smoky Slate and Highland Heather. 

    I cut my strips first, then blended the inks on. I textured the center Smoky Slate layer with the Glass & Gardens embossing folders.  The circle die-cut is from the Spotlight on Nature dies.

    I stamped the greeting twice; first on the circle and again on a small piece of card stock.  I fussy cut the 'Celebrate' out and added it with Stampin' Dimensionals.  This was such an easy card! 

    Here's the free project sheet for these cards: Click on the following link to print or download it.  Download Paper Tags with Irresistible Designs

    I featured the Paper Tags bundle for this card and another one below.  See it here. 

    You can see the other card I shared during the video below.  Besides the emboss resist technique on the diagonal I featured the Joseph's Coat technique.  See it here.  

    Here's the free project sheet with directions, photo, measurements and a supplies list: Download Paper Tags Joseph's Coat card

    Below is the video tutorial for this card and another I shared in the video:

    ~~~

    June Specials:

    The Suite Sale is on! 

    Buy one get 50% the second item – on all available suite products. 

    Shop here or see products below: 

    ~~~

    Last Chance List has been updated!  see it all here. Don't miss out on the deals!

    ~~~

    Earn free card kits in June with online orders! Get 4 kits with a $50 order and orders over $80 receive all 6 cards. All you need are greetings, gems and adhesives to assemble. 

    Order here 

    ~~~

    Get my Celebratory Sips PDF tutorial free with any online order in June!

    Leave a Reply

    Your email address will not be published. Required fields are marked *



Notice: LeeAnn Greff, Independent Stampin’ Up! Demonstrator, Manager. The content of this website is my sole responsibility as an independent Stampin’ Up! demonstrator and the use of, and content of, the classes, services, or products offered on this website is not endorsed by Stampin’ Up! Copyright 2025